 | | Kim on May 16, 2001 | CD Writer installation
I hope you can help me
Along with my new Adaptec CD writer, came a cautionary notice to disable bios power management before installing the writer. What does this mean? Are there any other things to disable (software) before i begin installing? I have a pentium 3 and im running Windows 98.
Also, Where on my system do i install the driver from the floppy that came with the writer?
Thank you |
|
 | | Eric Georgieff on May 18, 2001 | RE: CD Writer installation
I do not believe you have much to worry about. Your BIOS's power saving features should have very little effect on your installation. It was only a precaution that Adaptec suggested, and I highly doubt it is well founded. You should not need to disable any other system settings.
As for the drivers, if you're running Windows 98, you shouldn't need any. Why I installed my HP Cd-Writer Plus 8200i, I did not even need to install additional drivers. Windows simply detected the drive and used it as it would any other.
Eric Georgieff |
|
| | amir on November 22, 2001 | RE: CD Writer installation
I need driver for RW 8200i for winXP |
|
| | Gerda on January 6, 2002 | RE: CD Writer installation
I have just upgraded my system to Windows XP and now my Adaptec CD Writer (Iomega Zip CD 650) does not work. The system recognizes this hardware as a CD drive but not as a writer. I tried to find some driver updates in the Adaptec page but no such luck.
As for the software I have Roxio WinOnCD 3.8 Pro as well as CD Easy Creator 5 Basic with the updates for XP. Can someone please help me?! Thanks in advance. |
|
| | Dave on February 20, 2002 | RE: CD Writer installation
How do I install a CD Writer if I have a CD ROM a 3.5 Floppy and a ZIP?? Where do the wire have to go through??? |
|
| | Mike on March 22, 2002 | Iomega zip cd 650 external
did a system restore ,windows ME ,CD burner no longer reads a blank cd ,Drive D is not accessible,device is not ready??? I've updated drivers,completely removed+reinstalled software...What is the major malfunction with this thing???? |
|
| | Keith on April 6, 2002 | RE: CD Writer installation
I have just updated to Windows XP and would like very much to continue using my CD-Writer Plus version 8200. Unable to find a driver for the external RW disk. Help on this matter would be most appreciated. |
|
| | Grant Goodsell on April 17, 2002 | RE: CD Writer installation
I changed towers and upgraded from windows 95 to windows 2000 need drivers and software to install my HP CD Writer plus 9110i, Any information you can give would just super.
Thanks Grant |
|
| | Nik on April 18, 2002 | RE: CD Writer installation
I have windows XP.I have installed the CD-Writer (HP)8200. But when you turn on it says Detedting IDE,Followed by Disk error press ctrl alt delete to re start.Yet the jumpers are in the correct order.Do i have to access BIOS to get it to do somthing.Any help please.
Nik |
|
| | Selwyn on May 1, 2002 | RE: CD Writer = Device not ready
I am having problems with my HP CD-Writer 9100 series.Now it is giving me that E:\ is not accessible - Device not ready whenever i insert a cdrom either blank or with data.
However the system recognised the writer and was succesfully set up.
what can be the problem?
Please help |
|
| | audie on May 1, 2002 | RE: CD Writer installation
I am having problems with my Iomega Zip Cd 650 writer. It is noticed as a Cd drive but not a writer. I have just upgraded to windows xp. I need to find a driver that will make it work. Can some one please help?? thanks |
|
| | Janet on May 5, 2002 | RE: CD Writer installation
I get the message could not load acm wrapper when trying to use easy cd creator |
|
| | shakir on May 7, 2002 | RE: CD Writer installation
i have got 8200 series cd-writer plus but i lost my driver now when i download the driver of it & start to run it the message come "general failure reading this package" so u plz tell me the right site of it or send the driver of it to my email address
i would be very thankful to u |
|
| | Martin Wilson on May 9, 2002 | RE: CD Writer installation
Please can anybody advise. I've upgraded to Windows 2000 Profesional and as evidenced by problems so far I need drivers and software to install HP CD Writer plus 8200. Any help would be much appreciated
Thanks
Martin |
|
| | Eric Georgieff on May 9, 2002 | RE: CD Writer installation
Martin Wilson,
I own an HP CD-Writer Plus 8200 and am running Windows 2000. The CD Writer simply worked without the need to install any drivers. As far as I know, it's only your CD writing software (such as Adaptec Easy CD Creator) that actually needs to be able to recognise the CD-Writer to work with it.
I did however have a problem getting it to work at first. Adaptec Easy CD Creator could not seem to detect the CD-Writer and kept complaining that I could not write to CD-Rs since the drive was not a writer. The problem was easily fixed by reinstalling my cd creation software (Adaptec Easy Creator 4.0 Deluxe in my case).
Since we both have exactly the same situation, I highly doubt that your problem is driver related.
Eric Georgieff |
|
| | Dean on May 10, 2002 | RE: CD Writer installation
I have installed a cd writer as the master and a cd-rom as the slave. When I try to access either of them I get the message that the device is not ready. Any suggestions? I have checked and there are no conflicts.
Thanks
Dea |
|
| | John Harris on November 30, -0001 | 5/12/2002
00:09:00
Drivers for Iomega zip 650 cd
I had to reformat the desktop and cannot find my drivers for my writer...can someone assist |
|
| | joe on May 12, 2002 | RE: CD Writer installation
i have a problem installing nero5.5 to work
with my super24x12X40 cd-rw driver.
1. i can't read installation wizard in French
in there any website i can download installition wizard in English. |
|
| | ennaji mohamed on May 12, 2002 | RE: CD Writer installation
SVP send me the driver of HP CD-writer plus 8200 series |
|
| | Eric Georgieff on May 12, 2002 | RE: CD Writer installation
Hey folks,
There have been many request lately for various CD-Writer drivers. The reason many people are unable to find drivers for their CD-Writers is that CD-Writers operate without the need for any system level drivers. That means that Windows will work with your CD-Writer without the need to install any specific drivers just as it does with all IDE/ATAPI devices such as hard drives and CD-Rom drives. Since Windows is using your CD-Writer only to read, it can use a generic CD-Rom driver.
You will however require CD writing software, such as Roxio Easy CD Creator (formerly known as Adaptec Easy CD Creator) or Nero Burning ROM, that is compatible with your CD-Writer model since the writing method employed by CD-Writers varies according to the drive manufacturer and the drive model and must be known by the CD mastering software that needs to access the writer.
To find out what version of Easy CD Creator supports your particular CD-Writer model, please visit Roxio's CD-R Database (look in the "Which Roxio CD-R Software supports my Recorder?" section).
Eric Georgieff |
|
| | david k on May 12, 2002 | RE: CD Writer installation
could you please help me out iam needing
a driver for a MITSUMI cd-writter. thax |
|
| | Martin Wilson on May 14, 2002 | RE: CD Writer installation
Eric Georgieff.
Appreciate your response. Will do as you suggested.
Thanks. |
|
| | fahad on May 18, 2002 | RE: CD Writer installation Driver
I have samsung cd writer & i lost my cd so plz sent me the software for it |
|
| | sandy williams on May 18, 2002 | RE: CD Writer Driver/setup
I reformated my computer when I went to install the software for my (Smart and friendly CD.Speedwriter RW) I noticed my cd was cracked .I cant seam to get on the smartandfriendly web sit so I dont know what else to do ...I hope you can help.Thanks |
|
| | Deji Doherty on May 20, 2002 | RE: CD Writer installation
Hi,
i need the driver that is compatible with windows XP for my cd-writer (not HP brand).
Deji |
|
| | barbara on May 24, 2002 | RE: CD Writer installation
I can not get any disks to work in my drive. when i put in a disk it does not appear on my screen and under settings the auto insert notication box is checked. Also I tried it by going to Start and run typing in d:\setup, a dialog box appears and says "please insert disk into drive M. The disk was already in so I ejected it and put it in again. Nothing happens and the dialog box just remains on the screen. I also changed the drive setting to M and tried m:\cdsetup to no solution. Can anyone assist me or make any suggestions what is wrong. Thank you |
|
| | Mike Patalsky on May 28, 2002 | RE: CD Writer installation
i lost my cd burning software to my cd writer 8200 series. i need it because something happened when i installed windows xp. |
|
| | Septor on May 29, 2002 | RE: CD Writer installation
I have the WinXp and i own a HP 8200i series CDRW and the nero is not recognizing it. Have you got any idea what's wrong?
Also when i'm trying to write a cd through the Explorer it takes about ten minutes even the with a simple *.txt file!
drivers for xp anywhere?
Please help!!! |
|
| | sergio on June 1, 2002 | RE: CD Writer installation
hi, i just installed win xp professional to my pc and i have a adapted easy cd creator version 3.01b,but im not able to burn cd's i get a message that syas that i need to update the driver.
can u please tell me where i can go to downdoad the driver?
thanks!!!! |
|
| | Lolita on June 2, 2002 | RE: CD Writer installation
I need the drivers for my HP cd writer plus 9100 series.
Thanks |
|
| | antonio on June 3, 2002 | RE: CD Writer installation
gostaria de baixar o driver do gravador de cd HP CD-WRITER 8200 SERIE, AGRADEÇO A AJUDA. |
|
| | Bhuti on June 6, 2002 | RE: CD Writer installation
Hi All,
I have plugged in an hp-8100 cd write to my pc which runs windows 2000 server. I have installed Roxio software version 5.0 for the cd-writer to work but it doesn't work. Is there anything I have done wrong or the software is not compatible with windows 2000 server?
Please help. |
|
| | Yap on June 7, 2002 | CD Writer Driver
Hi all,
I had loss my HP 8200i driver, can anyone who have it please send to me? Please be mercy and help me. |
|
| | GENIUS WORKS on June 10, 2002 | RE: CD Writer installation
I have an HP CD writer plus 8100 series that i want to install on my new P4 win xp. It was disableb by WIN XP. So is there a driver that i can use so i wont be wasting money buying a new cd writer. The HP CD writer plus 8100 series is very useful to me.
Thanks so much for your help. |
|
| | Ryan on June 17, 2002 | HP WANTS YOUR $$$$$
I've looked into this problem and the only way anyone is going to get their HP Cd Writer to work is to update the driver.
HP has a website for all cd-writer models
with drivers for every OS. The only problem is that there charging everyone to update their driver to XP standards. If anyone could possiably have the new XP driver for my HP 9100i,,,, I would appreciate it much.
Good Luck Everyone!!! |
|
| | Usama on June 18, 2002 | I hope that u can help me .
I have got an hp cd-writer 8200 series .
But i could not install the software of it on windows xp.
so can you tell me what shall i do for this problem or tell me where can i download
software to make it work on windows xp .
thank you very much |
|
| | Julen on June 20, 2002 | RE: CD Writer installation
hello:
i need drivers for my cd-writer plus 8200e Series for Windows 2000 professional.
thanks |
|
| | Rob White on June 26, 2002 | RE: CD Writer installation
I am having problems with my HP CD-Writer 9100 series.Now it is giving me that E:\ is not accessible - Device not ready whenever i insert a cdrom either blank or with data.
However the system recognised the writer and was succesfully set up.
what can be the problem?
Please help |
|
| | chris on June 26, 2002 | RE: CD Writer installation
i need a driver for my cd burner hp 9100 series |
|
| | Chris on June 27, 2002 | RE: CD Writer installation
I have an HP writer 9100 series and i can't get my computer to recognize it. I also have a problem that a message will pop up saying insert software disk one. when i do that it's almost as if it doesn't even read the cd-rom.....there was a site that fixed this last time..it sent me into the system regestry and had me delete some things but i don't remember the site name. If anyone has it please respond thank you. |
|
| | johnny WEn on July 3, 2002 | RE: CD Writer installation HP CD writer
i have an internal hp cd writer plus, 8200i.
I deleted adaptec on it b/c it said" my hp cd creator was operating at the same time"
anyway, i deleted adaptec and now I can't get the cd writer to read. It tells me to get the installation disk, but i do not have it |
|
| | Tim Savery on July 6, 2002 | RE: CD Writer installation
What i am trying to find out is where to find software and drivers for my hp cd-writer 8200 series. |
|
| | D.Beckham on July 6, 2002 | RE: CD Writer installation
Hello my problem is how i can get software for my cd writer 8200 series, if anyone can help me it would be great and i hope for a reply,
thanks,
D.Beckham |
|
| | Jane Morley on July 6, 2002 | RE: CD Writer installation
I have had to re-install my nero5 burning rom due to a virus. I am unable to find a serial number. It tells me to insert the number on the CD packet but will not accept this number. Can you help, please? |
|
| | vic purse on July 8, 2002 | iomega zip 650
My logic is that I have used the Iomega Zip 650 CD-R in the past using the old software on the same computer and it works. When I install Hotburn it does not."Something is wrong." Nothing else has changed.
Response from Iomega follow:
This email is in response to an earlier chat session which you had with us. I have gone through your email transcripts completely. As you specified that you are getting error message "error reading table of contents from drive." This error message can be caused by either outdated USB chipset drivers (I Updated the drivers) or by a source CD-ROM drive that is not supported by Iomega HotBurn(I Ran the Hotburn test The source CD-ROM passes the Iomega Hotburn test), please follow the instructions from the link provided below for troubleshooting: Did not work same results
http://www.iomega.com/support/documents/11333.html
You may also follow the link provided below for information on running system test using Iomega HotBurn software: Worked for the source CD-ROM
http://www.iomega.com/support/documents/11118.html
Serial Number you provided show that you have Iomega ZipCDRW Drive which is a product of Iomega.
Sincerely,
Andren
Iomega Customer Support |
|
| | rajkumar on July 10, 2002 | RE: CD Writer installation
hi,
i get the message acm wrapper not found. I formatted my harddisk and tried to reinstall the driver but its giving this error. IT is able to recognise the drive as read only and not as read/write. The software used being adaptec direct CD.
by the way janet where u able to solve this problem??? please do reply to this mail
thanks,
kumar |
|
| | rense on July 13, 2002 | RE: CD Writer installation
CAN I INSTALL MY HP CR WRITER 8200 FOR WIN 95 IF I CAN FROM WHERE I CAN GET DRIVER FOR THAT
RENSE |
|
| | Rodney on July 16, 2002 | RE: CD Writer installation
I am having problems with my HP CD-Writer 9100 series.Now it is giving me that D:\ is not accessible - Device not ready whenever i insert a cdrom either blank or with data.
However the system recognised the writer and was succesfully set up. |
|
| | Vinay on July 16, 2002 | RE: CD Writer installation
I am unable to find driver for HP-writer 9100 series for Windows XP. What to do ? |
|
| | rajkumar on July 16, 2002 | RE: CD Writer installation
hi all,
solved the CD R-W problem. If windows media player is already installed before the CD R-W is installed it conflicts with the CD R-W ( somewhere i read it). Try to uninstall the entire CD R-W software and start reinstalling the drivers. It worked for my system. IF not maybe remove even the Media player and start reinstalling the CD R-W driver.
regards,
kumar |
|
| |
